Factory Promotional Black Nylon Nuts - Hexagon Nuts With Metric Coarse And Fine Pitch thread M1-M160 grade 4 with white zinc plated surface – Tiancong Detail:
Surface treatment
We have our own surface treatment plant, and the thickness of zinc layer meets the standard requirements. We can make authoritative inspection reports, including surface treatment such as hot galvanizing, Dacromet, electro galvanizing, boiling black, etc.
The outer hexagon screw is a matching nut used to fasten and connect two connected parts with through holes and components. Hex head screws are commonly used bolts. It is more important to use Class A and Class B outer hexagon. In addition, it is often used in the occasion of high assembly accuracy, large impact, vibration or cross rate load. Grade C outer 66 screws are used in situations where the surface is rough and the assembly accuracy is not required.
Product standards
GB series, Q standard series, DIN German standard series, IFI American standard series, BS British standard series, JIS Japanese standard series, ISO international standard series, etc.
One of the standards for hexagon bolts is the level standard, which is divided into 4.8 and 8.8. These two levels are used more frequently in the market. Especially Grade 4.8 outer hexagon bolt. Because it is much cheaper than grade 8.8 hex bolts. Of course, it is more widely used. But for products with high requirements. Because of its high requirements in hardness and other aspects.
Material
The material comes from a high-quality steel manufacturer, which can issue an authoritative material inspection report, including Q235, 35 #, 45 #, 345B, 40Cr, 35CrmoA, stainless steel 201, 304 and other special materials.
This requires the use of grade 8.8 hex bolts. Grade 8.8 outer hexagon bolt is harder in terms of hardness and screw torque. It is safer to use the product. Faster and more stable.
Exported countries or regions
Poland, Russia, Algeria, Egypt, Ghana, Kuwait, the United Arab Emirates, Kazakhstan, Malaysia, Pakistan, the Philippines, South Korea, Myanmar, Thailand, Ukraine, Syria, India, the United States, Turkey, Brazil, Sri Lanka, Norway, etc.
Product Parameters
Thread Size d | M4 | M5 | M6 | (M7) | M8 | M10 | M12 | (M14) | M16 | (M18) | M20 | (M22) | M24 | (M27) | M30 | (M33) | |||
P | Pitch | Coarse thread | 0.7 | 0.8 | 1 | 1 | 1.25 | 1.5 | 1.75 | 2 | 2 | 2.5 | 2.5 | 2.5 | 3 | 3 | 3.5 | 3.5 | |
Fine thread-1 | / | / | / | / | 1 | 1 | 1.5 | 1.5 | 1.5 | 1.5 | 2 | 1.5 | 2 | 2 | 2 | 2 | |||
Fine thread-2 | / | / | / | / | / | 1.25 | 1.25 | / | / | 2 | 1.5 | 2 | / | / | / | / | |||
m | max=nominal size | 3.2 | 4 | 5 | 5.5 | 6.5 | 8 | 10 | 11 | 13 | 15 | 16 | 18 | 19 | 22 | 24 | 26 | ||
min | 2.9 | 3.7 | 4.7 | 5.2 | 6.14 | 7.64 | 9.64 | 10.3 | 12.3 | 14.3 | 14.9 | 16.9 | 17.7 | 20.7 | 22.7 | 24.7 | |||
mw | min | 2.32 | 2.96 | 3.76 | 4.16 | 4.91 | 6.11 | 7.71 | 8.24 | 9.84 | 11.44 | 11.92 | 13.52 | 14.16 | 16.56 | 18.16 | 19.76 | ||
s | max=nominal size | 7 | 8 | 10 | 11 | 13 | 17 | 19 | 22 | 24 | 27 | 30 | 32 | 36 | 41 | 46 | 50 | ||
min | 6.78 | 7.78 | 9.78 | 10.73 | 12.73 | 16.73 | 18.67 | 21.67 | 23.67 | 26.16 | 29.16 | 31 | 35 | 40 | 45 | 49 | |||
e ① | min | 7.66 | 8.79 | 11.05 | 12.12 | 14.38 | 18.9 | 21.1 | 24.49 | 26.75 | 29.56 | 32.95 | 35.03 | 39.55 | 45.2 | 50.85 | 55.37 | ||
* | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
per 1000 units ≈ kg | 0.81 | 1.23 | 2.5 | 3.12 | 5.2 | 11.6 | 17.3 | 25 | 33.3 | 49.4 | 64.4 | 79 | 110 | 165 | 223 | 288 | |||
Thread Size d | M36 | (M39) | M42 | (M45) | M48 | (M52) | M56 | (M60) | M64 | (M68) | M72 | (M76) | M80 | (M85) | M90 | M100 | |||
P | Pitch | Coarse thread | 4 | 4 | 4.5 | 4.5 | 5 | 5 | 5.5 | 5.5 | 6 | 6 | / | / | / | / | / | / | |
Fine thread-1 | 3 | 3 | 3 | 3 | 3 | 3 | 4 | 4 | 4 | / | 6 | 6 | 6 | 6 | 6 | 6 | |||
Fine thread-2 | / | / | / | / | / | / | / | / | / | 4 | 4 | 4 | 4 | 4 | 4 | 4 | |||
m | max=nominal size | 29 | 31 | 34 | 36 | 38 | 42 | 45 | 48 | 51 | 54 | 58 | 61 | 64 | 68 | 72 | 80 | ||
min | 27.4 | 29.4 | 32.4 | 34.4 | 36.4 | 40.4 | 43.4 | 46.4 | 49.1 | 52.1 | 56.1 | 59.1 | 62.1 | 66.1 | 70.1 | 78.1 | |||
mw | min | 21.92 | 23.52 | 25.9 | 27.5 | 29.1 | 32.3 | 34.7 | 37.1 | 39.3 | 41.7 | 44.9 | 47.3 | 49.7 | 52.9 | 56.1 | 62.5 | ||
s | max=nominal size | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 90 | 95 | 100 | 105 | 110 | 115 | 120 | 130 | 145 | ||
min | 53.8 | 58.8 | 63.1 | 68.1 | 73.1 | 78.1 | 82.8 | 87.8 | 92.8 | 97.8 | 102.8 | 107.8 | 112.8 | 117.8 | 127.5 | 142.5 | |||
e ① | min | 60.79 | 66.44 | 71.3 | 76.95 | 82.6 | 88.25 | 93.56 | 99.21 | 104.86 | 110.51 | 116.16 | 121.81 | 127.46 | 133.11 | 144.08 | 161.02 | ||
* | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
per 1000 units ≈ kg | 393 | 502 | 652 | 800 | 977 | 1220 | 1420 | 1690 | 1980 | 2300 | 2670 | 3040 | 3440 | 3930 | 4930 | 6820 |
Why choose Us
Based on products with high quality, competitive price, and our full range service, we have accumulated professional strength and experience, and we have built up a very good reputation in the field. Along with the continuous development, we commit ourselves not only to the Chinese domestic business but also the international market. May you moved by our high quality products and passionate service. Let’s open a new chapter of mutual benefit and double win.
Product detail pictures:
Related Product Guide:
We believe that long term partnership is a result of high quality, value added service, rich experience and personal contact for Factory Promotional Black Nylon Nuts - Hexagon Nuts With Metric Coarse And Fine Pitch thread M1-M160 grade 4 with white zinc plated surface – Tiancong, The product will supply to all over the world, such as: Estonia, Afghanistan, Colombia, All the imported machines effectively control and guarantee the machining precision for the items. Besides, we have a group of high-quality management personnels and professionals, who make the high-quality items and have the ability to develop new merchandise to expand our market home and abroad. We sincerely expect customers come for a blooming business for both of us.
By Mona from Cambodia - 2018.06.12 16:22
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Sandra from Dominica - 2017.12.19 11:10